Exploring the RTA and RDA Tanks
If you want to customize your vaping experience, you may have heard of RTA and RDA tanks. These two rebuildable atomizers allow you to build your coils and wicks and use them with your favorite e-liquid or cannabis product. But what are the differences between RTA and RDA tanks, and how do you choose the best one for your needs? In this article, we will explore the features, benefits, drawbacks, and tips of using RTA and RDA tanks, as well as how to use them with cannabis products, how to clean and maintain them, how to troubleshoot common problems, and how to enhance your vaping experience with them.
Introduction
Vaping is a popular way of consuming nicotine or cannabis products without the harmful effects of combustion. Vaping involves heating an e-liquid or a cannabis product to produce vapor inhaled by the user. Many vaping devices and accessories, such as mods, batteries, chargers, tanks, cartridges, pods, etc., can be used. One of the most critical components of a vaping device is the atomizer. The atomizer is the part that heats the e-liquid or the cannabis product and turns it into vapor. Different atomizer types vary in design, functionality, performance, and quality. Some of the most common types of atomizers are:
Pre-built atomizers are atomizers with pre-made coils and wicks prepared to utilize. They are easy to use and replace but offer less customization and may be more expensive in the long run.
Rebuildable atomizers: These are atomizers that allow you to build your coils and wicks using wires, cotton, or other materials. They offer more customization and may be more cost-effective in the long run, but they require more skill and maintenance.
Sub-ohm atomizers: These are atomizers that use coils with low resistance (below 1 ohm) that produce more vapor and flavor but consume more battery power and e-liquid.
Temperature control atomizers: These are atomizers that use coils with specific materials (such as nickel or titanium) that a temperature control mod can regulate to prevent dry hits and burnt taste.
Among the rebuildable atomizers, two main types are popular among vapers: RTA and RDA tanks. RTA stands for rebuildable tank atomizer, and RDA stands for rebuildable drip atomizer. Both types have advantages and disadvantages depending on your vaping preferences, style, experience level, and budget. This article will compare and contrast RTA and RDA tanks regarding their features, performance, benefits, drawbacks, tips, and tricks. We will also discuss how to use RTA and RDA tanks with cannabis products, clean and maintain them properly, troubleshoot common problems, and enhance your vaping experience with them.
What is an RTA Tank?
An RTA tank is a rebuildable atomizer with a deck for mounting coils and wicks and a tank for holding vape liquid. The deck is usually located at the bottom or the top of the tank and has posts or holes for inserting wires. The wicks are threaded through the coils and extend into the tank, absorbing the e-liquid. The tank is usually made of glass or plastic, ranging from 2 ml to 10 ml. The tank also has an airflow system that allows you to adjust how much air passes through the coils.
To use an RTA tank, you need to build your coils using wires of different materials (such as kanthal or stainless steel), gauges (such as 24 or 28), shapes (such as round or flat), and configurations (such as single or dual). You must also wick your coils using cotton or other materials (such as rayon or hemp). You can choose different types of wires and wicks depending on your desired resistance level (measured in ohms), wattage level (measured in watts), temperature level (measured in degrees Celsius or Fahrenheit), flavor intensity, and vapor production. You can also experiment with different coil designs (such as Clapton or Alien) and wicking techniques (such as Scottish roll or pancake) to enhance your vaping experience.
After building and wicking your coils, you must set up your RTA tank by filling it with e-liquid and priming it. To fill your RTA tank, unscrew the top cap or the bottom base and pour the e-liquid into the tank through the fill holes. To prime your RTA tank, you must saturate the wicks with e-liquid by dripping some drops onto the coils and letting them soak for a few minutes. You must also adjust the airflow system to your preference by turning the airflow ring or the airflow holes. Once your RTA tank is ready, attach it to your mod and start vaping.
Some of the advantages of using an RTA tank are:
Convenience: An RTA tank allows you to vape longer without refilling or dripping e-liquid frequently. You can also carry your RTA tank around without worrying about leakage or spillage.
Flavor: An RTA tank can produce rich and intense flavor due to the proximity of the coils and the wicks to the mouthpiece. You can also fine-tune your taste by adjusting the airflow system, ring, and wick configuration.
Vapor production: An RTA tank can produce significant and dense vapor clouds due to the coils' low resistance and high wattage. You can also increase your vapor production by adjusting the airflow system, ring, and wick configuration.
Customization: One of the critical advantages of using an RTA tank is the ability to tailor your vaping experience to your exact preferences. With an RTA, you can build your coils and wicks, giving you control over factors like coil type, resistance, and wick material. Additionally, the market offers a diverse selection of RTA tanks, each varying in size, shape, design, deck style, airflow system, and more. This wide array of options lets you choose an RTA that suits your vaping style perfectly.
Cost-Effectiveness: Another significant benefit of using an RTA tank is its cost-effectiveness over time. Unlike disposable setups or pre-made coil replacements, an RTA allows you to reuse your coils and wicks, reducing the ongoing expenses of vaping. By crafting and maintaining your coils, you can significantly reduce the costs of purchasing pre-made ones. Furthermore, you can conserve e-liquid by using higher resistance coils and operating at lower wattages, saving you money on your vaping supplies.
Some of the disadvantages of using an RTA tank are:
Leakage: An RTA tank may leak e-liquid if it is not built or wicked properly if it is overfilled, underfilled, tilted, shaken, or exposed to high temperature or pressure changes. Leakage can cause mess, waste, and damage to your device and surroundings.
Maintenance: An RTA tank requires more maintenance than a pre-built atomizer as you must build and wick your coils regularly, clean and dry your tank periodically, replace your locks and wicks when they wear out or burn out, etc.
Airflow: An RTA tank may have less airflow than an RDA tank as it has a smaller chamber and a tighter draw. Less airflow can result in less flavor and vapor production, more heat generation, more spit back, etc.
Capacity: An RTA tank may have less power than an RDA tank as it has a more enormous deck that takes up more space. Less capacity can result in more frequent refilling and less vaping time.
Compatibility: An RTA tank may have less compatibility than an RDA tank as it has a specific size and shape that may need to fit better with some mods or batteries. Less compatibility can result in poor performance or connection issues.
Difference Between an RTA and an RDA Tank. Which one?
Choosing between an RTA and an RDA tank depends on your preference, vaping style, and budget. There is no definitive answer to which one is better, as both have pros and cons. However, here is the difference between RTA and RDA tanks:
Ease of Use: If you want a simple and convenient vaping experience, you may prefer an RTA tank over an RDA tank. An RTA tank does not require frequent dripping or refilling; you can use it on the go. An RDA tank, on the other hand, requires more attention and care, as you have to drip e-liquid every few puffs and check your coil and wick condition regularly.
Flavor: If you want a superb and intense flavor, you may prefer an RDA tank over an RTA tank. An RDA tank delivers the freshest and purest flavor as the vapor travels directly from the coil to your mouth. On the other hand, an RTA tank may lose some flavor due to the extended chimney and the possible leakage or flooding of the e-liquid.
Vapor Production: If you want a vast and dense vapor, you may prefer an RDA tank over an RTA tank. An RDA tank allows you to use more power and lower resistance coils, which produce more heat and vapor. An RTA tank, on the other hand, may limit your vapor production due to the restricted space and airflow of the coil.
Customization: If you want a versatile and flexible vaping experience, you may like RTA and RDA tanks. Both types of tanks allow you to build your coils and wicks, which gives you more control over the flavor, vapor production, and cost of your vaping. You can also experiment with both tanks' different e-liquids, settings, and techniques.
Cost: If you want a budget-friendly vaping experience, you may prefer an RDA tank over an RTA tank. An RDA tank is usually cheaper than an RTA tank as it has fewer parts and materials. An RDA tank also uses less e-liquid than an RTA tank, as you only drip what you need. However, both tanks can save you money in the long run compared to buying pre-made coils or tanks.
Examples of Popular RTA and RDA Tanks
Many RTA and RDA tanks are available on the market, each with features, design, and performance. Here are some examples of popular and high-quality RTA and RDA tanks that you can try:
Aspire Mini Nautilus BVC Atomizer: This classic RTA tank has a 2ml capacity, a bottom vertical coil (BVC) system, and an adjustable airflow control. It is easy to use, reliable, and delivers great flavor.
Rick and Morty Vape Pen: This fun and colorful RDA tank has a 0.5ohm dual coil build deck, a 510 drip tip adapter, and a Rick and Morty-themed design. It is easy to build, durable, and produces massive vapor.
Zeus X Mesh RTA: This modern RTA tank has a 4.5ml capacity, a mesh coil build deck, and a top-to-side airflow system. It is leak-proof, easy to wick, and delivers smooth flavor.
Dead Rabbit V2 RDA: This upgraded RDA tank has a 24mm diameter, a four-post build deck, and a dual airflow system. It is easy to install coils, supports single and double coil builds, and delivers excellent flavor.
Tips on How to Choose the Best Tank for You
Here are some tips on how to choose the best tank for your vaping style, preferences, and budget:
Read reviews: You can read online reviews from other vapers who have tried different tanks and see what they liked or disliked about them. You can also watch video reviews or tutorials on using or building other tanks.
Ask for recommendations: You can ask for recommendations from your friends or family who vape or your local vape shop staff. You can also join online forums or communities where vapers share their opinions and experiences with different tanks.
Try before you buy: You can try different tanks before you buy them. You can borrow them from your friends, family, or local vape shop if they offer testing services. You can also purchase sample packs or starter kits that include different tanks for you to try.
How to Build Coils and Wicks for RDA and RTA Tanks?
Building coils and wicks for RTA and RDA tanks is a skill that requires some knowledge, practice, and patience. You need essential tools and materials, such as wires, cotton, scissors, tweezers, coil jigs, ohm meters, etc. You also need to follow some safety precautions, such as checking the resistance of your coils, using compatible batteries and mods, etc. Here are the basics of coil building and wicking for RTA and RDA tanks:
How to Build Coils for RDA and RTA Vape Tanks?
To build coils for RTA and RDA tanks, you need to follow these steps:
Choose your wire: You can choose from different types of cables, such as kanthal, nichrome, stainless steel, etc. Each type of wire has properties such as resistance, heat capacity, flavor, etc. You also need to choose the gauge or thickness of your wire, which affects the resistance and performance of your coil.
Cut your wire: You must cut a piece according to the length and number of wraps you want for your coil. You can use a coil jig or a screwdriver to wrap your wire around it. You can also use an online calculator or a chart to determine the optimal length and number of wraps for your desired resistance.
Wrap your wire: You need to wrap your wire around the coil jig or the screwdriver tightly and evenly. You can wrap your wire in a clockwise or counterclockwise direction, depending on your preference. You can also cover your wire in different shapes or patterns, such as single, dual, Clapton, mesh, etc.
To install your coil, place it on the deck of your RTA or RDA tank and insert the wire leads or ends into the designated holes or slots. Secure the coil in place using screws or clamps provided on the deck. It's crucial to ensure the coil is centered and aligned correctly on the deck, with no potential for a short circuit or contact between the coil and the deck or cap.
After installation, check the resistance of your coil using either an ohm meter or a mod with a built-in ohm reader. Ensure that the coil's resistance matches the specifications of your battery and mod. Additionally, briefly fire the coil at a low wattage to check its heating pattern. Verify that the coil heats up uniformly from the center to the edges without any hot spots or uneven heating. This step is essential for a safe and efficient vaping experience.
How to Wick Coils for RTA and RDA Vape Tanks?
To wick coils for RTA and RDA tanks, you need to follow these steps:
Choose your cotton: You can choose from different types of cotton, such as organic cotton, Japanese cotton, cotton bacon, etc. Each type of cotton has its properties, such as absorption, flavor, durability, etc. You also need to choose the amount and density of your cotton according to your coil size and e-liquid viscosity.
Cut your cotton: You need to cut a piece of cotton according to the width and length you want for your wick. You can use scissors or tweezers to cut your cotton. You can also use an online calculator or a chart to determine your wick's optimal width and length.
Thread your cotton: You need to thread your cotton through your coil by twisting one end slightly and inserting it into one end of your coil. You also need to pull your cotton gently through the other end of your coil until it is snug but not too tight. You need to make sure that there is enough cotton inside and outside of your coil.
Trim your cotton: You must trim your cotton according to the size and shape of your RTA or RDA tank by cutting off the excess cotton on both ends of your wick. You can use scissors or tweezers to trim your cotton. You can gently fluff or thin out your cotton by combing it with tweezers or a toothpick.
.jpg)
%20(1).png)
.png)
0 Comments